DIY Wood Cleaner

The worst thing you could do with wood is use water to clean it. The water can stain the finish of your wood piece or even worse warp the wood. Once the wood piece is warped it is impossible to get the original look back. 

I wanted to share a quick recipe for a DIY wood cleaner that I've been using to clean all the wood furniture that I have received from my grandparents' old house.

In a clean and dry spray bottle I added the following:

½ cup Apple Cider Vinegar

½ cup Olive Oil

1 tablespoon Dish Soap

1 tablespoon Lemon Juice

Just take a look at the results. I dusted the entire chair with a dry cloth and then cleaned the right side of the chair with my wood cleaner. You can see how dirty the left side was. 

You can use white vinegar if you do not have apple cider vinegar. And you can use any type of oil as well. 

The vinegar and soap act as cleaning agents while the oil conditions the wood. 

Don't forget to check out my Store for already created items!

See updates and follow MWL Goodies:
Full Website
Store
Facebook Page
Instagram
Pinterest

Repurposing a Three Bulb Light Fixture into a Candle Holder - Part 2

I actually have done this type of repurposing a second time with a used light fixture. A friend was renovating one of his apartments before putting it up for rent. In the process, he had a vintage light fixture which he asked if I could make something for him with.  

Here's what it looked like to start with, covered in paint and grime. So the first thing I set out to do was clean it. You can check out the process I went through to clean it in my post "Cleaning Metal with Toothpaste". It took a bit of effort to get it cleaned. 

Once I had it cleaned up, I had to add the candle holders. I used a used and cleaned glass candle for the center to give it a unique look and added a glass bowl to both sides. I used hot glue to secure each of the glasses. Since the metal sides of the fixture were sloped I had to build up part of the side using hot glue to make sure the glass bowls would sit flat. 

Next I painted the three glasses black. I then used stain on the entire thing. I made sure not to get any black paint or stain on the inside of any of the three glasses. Since this will be used with candles, I wanted to be absolutely sure nothing is flammable where the candle flame is. 

Here's the finished product!

Repurposing a Three Bulb Light Fixture into a Candle Holder - Part 1

When we moved into our house a few years ago, we noticed that the previous owners left a few house-hold items behind. Mostly left over tiles from some of the renovations that had been done to the house. But they also left things that look like they were intended for a bathroom renovation. And even though we have renovated the first floor bathroom which was in dyer need of an update, the fixtures which were left by the previous owner just do not match the fixtures we finally decided to use for that bathroom. So with an extra 3-bulb light fixture at my disposal, I decided to turn it into a candle holder. 

Since it would no longer be a light fixture, I had to first remove the light wiring. Next, I painted the whole thing black. But I was not completed in love with the color effect so I added some brown (rust) coloring over the entire fixture.

I added one more light/transparent coat of black. This gave the fixture a dusty matte finish. And finally, I sealed the paint with a thick coat of modge podge to give it more of a shine. 

I added 3 glass candles which I intend on reusing the glasses in this candle holder when the candles burn out. And here is the finished product. 

Dying Clothes Pins

I have seen a few articles online about dying clothes pins and I just had to try it out for myself. This is what happened when I did try.

A little background on why I decided to even dye some of my clothes pins. I have two large tapestries which I have mounted onto my wall using clothes pins and Velcro (I may have to write a blog about how well or bad these were to use in the future). They are a cute way of displaying the tapestry without damaging the tapestry itself, but the color of plain clothes pins just don’t match with the decor in my basement. So, when I saw that you could dye clothes pins, I knew I had to try to make them a color that would compliment the tapestries they were displaying.

I tried dying 10 clothes pins and two tiny wooden hearts. I filled a clean glass jar (used to be for tomato sauce) with hot water (boiling), a table spoon of white vinegar, the clothes pins and hearts, and blue food coloring; letting them sit overnight.

After 24 hours they seemed more green then blue. I decided to add more blue food coloring and leave them for another 24 hours. I must admit I forgot about them and they actually sat for about another 60 hours or so.

They looked a bit dark when they were wet.

I must say I actually liked the color they dried to.

Next time I will take the metal off the clothes pins prior to dying them. Some of the metal started to tarnish from being in the water mixture for so long.

They turned out quite well to hold up the tapestry in my basement!

Don't forget to check out my store and other social media sites:
Store: https://www.bonanza.com/booths/MWL_Goodies
Full Website: http://mwlgoodies.000webhostapp.com/
Facebook: https://www.facebook.com/MWL-Goodies-420321025376565
Instagram: https://www.instagram.com/mwlgoodies/
Pinterest: https://www.pinterest.com/mwlgoodies/

4th of July

This is a special addition for the 4th of July!

I created a few items for a BBQ we are going to which has a strict Red, White, and Blue dress code. 😁

A few adjustable bracelets / anklets

A belt

A simple necklace

And a thick headband

Happy 4th of July!

Cleaning Metal with Toothpaste

I started a crafting endeavor recently which I thought would be quite simple and straight forward as I have done it in the past; turning an old light fixture into a candle holder. I hope to later write a post about how I have done that.



This time was different. The old light fixture was not clean. It had old paint layered on top and layers of dirt on the underside. I thought a quite wash with soup would do the trick… It did not. So, I turned to my tried and go to method for cleaning dingy metals; toothpaste. I know it sounds odd, but I have also used this method when cleaning jewelry.



Here is how the light fixture looked before I started cleaning.

I first scrapped off as much paint as I could and did a cleaning with dish soap and water. This is the results.

Then it was onto the toothpaste. Look at how it came out! The left (gold) side is the side I cleaned with the toothpaste. You can see the difference from the tarnished right side. I originally thought this was silver, but after washing it with the toothpaste, I can now see that it is actually gold.

I was quite happy with the results and am excited to move onto the next step to turn this into a candle holder.

What you can make from crocheting squares/rectangles – Part 3: Scarves

In case you missed it, check out Part 1: Blankets, Towels, Pot Holders

https://mwlgoodies.blogspot.com/2019/03/what-you-can-make-from-crocheting.html

And Part 2: Ear Warmers and Headbands

https://mwlgoodies.blogspot.com/2019/04/what-you-can-make-from-crocheting.html

In this part of the series, I would like to share with you my newest winter scarf design.

I created this as a gift to a new co-worker who recently moved north and is experiencing his first winter in the northeast. Let’s just say he is not used to the cold weather up here.

This pattern is intended to be very thick and warm for the dead of winter so I used 4 ply acrylic yarn for this pattern. Of course, you can always make a smaller version of this by cutting down the dimensions to 22in x 70in to create a “skinny scarf”. Also, using a lightweight yarn will also make this pattern more suitable for lighter winters.

The stitches (st) I use for this pattern are chain (ch), single crochet (sc), and double crochet (dc).

I use 4 ply yarn with the hook suggested on the yarn label.

Start with ch 35

Row 1: 34 sc, turn

Row 2: ch 2, skip (sk) sc, sc in next st, sc across, turn

Row 3: ch 2, sc in ch space, ch across

Row 4 – 8: repeat row 3

row 9: ch 2, dc across,

row 10: ch 3, sk dc, ch, dc in next st,

row 11: dc across,

row 12: ch 2, sk sc, sc in next st, sc across, turn

row 13: ch 2, sc in ch space, ch across

Row 14 – 18: repeat row 3

row 19: ch 2, dc across,

row 20 – 21: repeat row 19

Row 22 – 121: repeat rows 12 through row 21

Row 122 – 131: repeat row 2 through row 8

Row 132: ch, sc across

ch, sc around edges, 3 sc in each corner stitch, tie off

Please comment below if you have any questions about my pattern design. And visit my store front to see what creations I have for sale today.

https://www.bonanza.com/booths/MWL_Goodies